All about old tyres recycling and the most effective technologies for material recovery
From 5 to 8 November, we will attend Ecomondo 2024, the key event for green and circular economy in Europe. Come and visit us in hall A3 booth 205-104. An Ecostar expert will be happy to discuss and select the best solution for your material treatment. Request your free entrance ticket here.
Each year, 30 million tons of end-of-life tyres (ELTs) are generated worldwide, making the transformation of this waste into resources a crucial challenge. Fortunately, around 88% of end-of-life tyres are collected and recovered, an impressive figure when compared to the mere 14% recycling rate of plastic packaging. Thanks to modern tyre recycling technologies, discarded tyres are transformed into valuable materials for industries such as construction and sports.
In this article, we explore how tyre recycling is a powerful way to reduce environmental impact and promote the circular economy.
The end-of-life tyre recycling process
Despite their seemingly simple appearance, tyres are complex products composed of more than 200 different materials, including natural and synthetic rubbers, carbon black, silica, reinforcing fillers, steel, textiles, and various chemicals. Once they reach the end of their life cycle, end-of-life tyres can take two main paths:
- material recycling, where new materials like rubber, steel, and textile fibers are recovered,
- energy recovery, where end-of-life tyres are used as fuel in facilities such as cement plants. Due to their high calorific value, similar to coal but with significantly lower emissions, end-of-life tyres are also a valuable energy resource.
How the end-of-life tyres disposal and recycling process takes place
During the recovery and recycling process, old tyres are sent to specialized plants where they are mechanically shredded and screened into progressively smaller pieces. This process allows for the separation of the main components: rubber, steel, and textile fibers. The end-of-life tyre recycling process is carried out in several stages:
- First shredding: end-of-life tyres are reduced into fragments between 5 and 40 cm, known as “shreds.” These can either be used for energy recovery or further processed. Ecostar supports this treatment phase with its screening solutions, enabling the separation of material into 50 mm fractions or customized sizes based on client specifications.
- Second shredding: The shreds are further reduced, allowing for the complete separation of rubber, steel, and textile fibers. The rubber of the tyre is then processed into granules or powder, ready for new applications.
- Material recovery: Depending on the final use, the treatment process produces various types of materials, including rubber chips (20-50mm), rubber granules (0.8-20mm), and rubber powder (<0.8mm), along with steel and textiles, ready to be reused in various industries.
This efficient process for the recovery and recycling of scrap tyres not only reduces waste but also recovers valuable materials, significantly contributing to sustainability.
Recycling old scrap tyres helps conserve natural resources, reduce landfill waste, and lower greenhouse gas emissions. For example, in Italy in 2023, tyre recycling prevented 297,000 tons of CO2 emissions—equivalent to the emissions of 183,000 cars driving 10,000 km per year. Additionally, recycling saved 274,000 tons of fossil and mineral resources.
The end-of-life tyre recycling market: an expanding sector
The global scrap tyre recycling market is experiencing steady growth, valued at $5.67 billion in 2023 and expected to reach $7.71 billion by 2033. This growth, with a compound annual growth rate (CAGR) of 3.16%, is driven by increasing attention to sustainability and resource conservation. Governments and organizations worldwide are promoting tyre recycling through regulations, incentives, and circular economy strategies aimed at reducing waste and minimizing environmental impact.
In Europe, 92.5% of used tyres in 2018 were treated through eco-friendly processes, such as reuse, recycling, and other forms of recovery. This is a clear example of the circular economy in action, reducing waste while generating positive environmental and economic outcomes. It represents a key solution for the planet’s sustainable future.
In Italy, around 370,000 tons of end-of-life tyres are collected each year. Of these, 52% are used for energy recovery, while the remaining 48% is destined for material recovery. A large portion of end-of-life tyres utilized for energy recovery is exported to foreign facilities, while only five authorized plants in Italy handle less than 50,000 tons. As for material recovery, around 135,000 tons of end-of-life tyres are transformed into granules, with over 50% of that used as infill for sports fields. The use of rubber powder for asphalt is still limited, though it holds great potential for absorbing significant amounts of material.
Applications of recycled tyres: the second life of scrap tyres
The materials obtained from tyre recycling have applications across numerous industries. Rubber granules are widely used in road construction to produce modified asphalt with improved mechanical performance and reduced noise pollution. Currently, nearly 900 km of roads in Italy contain rubber powder from recycled end-of-life tyres.
In the sports sector, recycled rubber is used for playgrounds, athletic tracks, and synthetic turf surfaces, thanks to its elastic and shock-absorbing properties. Other uses include acoustic insulation, urban furniture, and design products.
You can explore the various applications of recycled tyres here.
Case study: Ecostar screening technology in tyre recycling
End-of-life tyres can be repurposed in various industries, such as sports, construction, road surfacing, or even energy production. Each sector requires a final product with specific dimensions, which is why multi-fraction technology can enhance both productivity and material quality.
Ecostar’s screening solutions, equipped with the patented anti-clogging DDS (Dynamic Disc Screening) technology, are particularly effective in handling the metal parts commonly found in tyres, which often cause issues with traditional screening solutions.
Find out what we can do for screening and recycling of end-of-life tires.
Let’s take a closer look at a specific case study
![Each year, 30 million tons of end-of-life tyres (ELTs) are generated worldwide, making the transformation of this waste into resources a crucial challenge. Fortunately, around 88% of end-of-life tyres are collected and recovered, an impressive figure when compared to the mere 14% recycling rate of plastic packaging. Thanks to modern tyre recycling technologies, discarded tyres are transformed into valuable materials for industries such as construction and sports. In this article, we explore how tyre recycling is a powerful way to reduce environmental impact and promote the circular economy. [h3] The end-of-life tyre recycling process Despite their seemingly simple appearance, tyres are complex products composed of more than 200 different materials, including natural and synthetic rubbers, carbon black, silica, reinforcing fillers, steel, textiles, and various chemicals. Once they reach the end of their life cycle, end-of-life tyres can take two main paths: ● material recycling, where new materials like rubber, steel, and textile fibers are recovered, ● energy recovery, where end-of-life tyres are used as fuel in facilities such as cement plants. Due to their high calorific value, similar to coal but with significantly lower emissions, end-of-life tyres are also a valuable energy resource. [h4] How the end-of-life tyres disposal and recycling process takes place During the recovery and recycling process, old tyres are sent to specialized plants where they are mechanically shredded and screened into progressively smaller pieces. This process allows for the separation of the main components: rubber, steel, and textile fibers. The end-of-life tyre recycling process is carried out in several stages: 1. First shredding: end-of-life tyres are reduced into fragments between 5 and 40 cm, known as "shreds." These can either be used for energy recovery or further processed. Ecostar supports this treatment phase with its screening solutions, enabling the separation of material into 50 mm fractions or customized sizes based on client specifications. 2. Second shredding: The shreds are further reduced, allowing for the complete separation of rubber, steel, and textile fibers. The rubber of the tyre is then processed into granules or powder, ready for new applications. 3. Material recovery: Depending on the final use, the treatment process produces various types of materials, including rubber chips (20-50mm), rubber granules (0.8-20mm), and rubber powder (<0.8mm), along with steel and textiles, ready to be reused in various industries. This efficient process for the recovery and recycling of scrap tyres not only reduces waste but also recovers valuable materials, significantly contributing to sustainability. Recycling old scrap tyres helps conserve natural resources, reduce landfill waste, and lower greenhouse gas emissions. For example, in Italy in 2023, tyre recycling prevented 297,000 tons of CO2 emissions—equivalent to the emissions of 183,000 cars driving 10,000 km per year. Additionally, recycling saved 274,000 tons of fossil and mineral resources. [h3] The end-of-life tyre recycling market: an expanding sector The global scrap tyre recycling market is experiencing steady growth, valued at $5.67 billion in 2023 and expected to reach $7.71 billion by 2033. This growth, with a compound annual growth rate (CAGR) of 3.16%, is driven by increasing attention to sustainability and resource conservation. Governments and organizations worldwide are promoting tyre recycling through regulations, incentives, and circular economy strategies aimed at reducing waste and minimizing environmental impact. In Europe, 92.5% of used tyres in 2018 were treated through eco-friendly processes, such as reuse, recycling, and other forms of recovery. This is a clear example of the circular economy in action, reducing waste while generating positive environmental and economic outcomes. It represents a key solution for the planet’s sustainable future. In Italy, around 370,000 tons of end-of-life tyres are collected each year. Of these, 52% are used for energy recovery, while the remaining 48% is destined for material recovery. A large portion of end-of-life tyres utilized for energy recovery is exported to foreign facilities, while only five authorized plants in Italy handle less than 50,000 tons. As for material recovery, around 135,000 tons of end-of-life tyres are transformed into granules, with over 50% of that used as infill for sports fields. The use of rubber powder for asphalt is still limited, though it holds great potential for absorbing significant amounts of material. Applications of recycled tyres: the second life of scrap tyres The materials obtained from tyre recycling have applications across numerous industries. Rubber granules are widely used in road construction to produce modified asphalt with improved mechanical performance and reduced noise pollution. Currently, nearly 900 km of roads in Italy contain rubber powder from recycled end-of-life tyres. In the sports sector, recycled rubber is used for playgrounds, athletic tracks, and synthetic turf surfaces, thanks to its elastic and shock-absorbing properties. Other uses include acoustic insulation, urban furniture, and design products. You can explore the various applications of recycled tyres here. [LINK] Case study: Ecostar screening technology in tyre recycling End-of-life tyres can be repurposed in various industries, such as sports, construction, road surfacing, or even energy production. Each sector requires a final product with specific dimensions, which is why multi-fraction technology can enhance both productivity and material quality. Ecostar’s screening solutions, equipped with the patented anti-clogging DDS (Dynamic Disc Screening) technology, are particularly effective in handling the metal parts commonly found in tyres, which often cause issues with traditional screening solutions. Find out what we can do for screening and recycling of end-of-life tires. Let’s take a closer look at a specific case study: Client: market leader of cement Industry Location: Turkey Year: 2021 Client requests: to achieve three precise screening ranges: 0–50 mm, 50–150 mm, and above 150 mm Solution provided: Hexact 7000 stationary screen, featuring DDS technology, capable of processing 40 T/h with 70 mm and 150 mm fraction sizes Results achieved ● Ecostar’s screening solutions reduce wear on secondary shredders, leading to cost savings for operators. ● Increased productivity, less clogging due to the patented DDS system, and lower maintenance costs compared to traditional screens. ● Thanks to the inverter, the operator can adjust the disc speed and change the final material size by +/-30%. [h3] Conclusion: why ELT’s management is important for sustainability Recycling end-of-life tyres is a crucial global effort to reduce waste, preserve resources, and minimize environmental impact. With the market’s growth and ongoing technological innovation, the potential for new sustainable products derived from tyre recycling will continue to expand, contributing to sustainability across various industries.](https://ecostar.eu.com/app/uploads/2024/10/Progetto-senza-titolo-16-1-300x169.jpg)
Client: market leader of cement Industry
Location: Turkey
Year: 2021
Client requests: to achieve three precise screening ranges: 0–50 mm, 50–150 mm, and above 150 mm
Solution provided: Hexact 7000 stationary screen, featuring DDS technology, capable of processing 40 T/h with 70 mm and 150 mm fraction sizes
Results achieved
- Ecostar’s screening solutions reduce wear on secondary shredders, leading to cost savings for operators.
- Increased productivity, less clogging due to the patented DDS system, and lower maintenance costs compared to traditional screens.
- Thanks to the inverter, the operator can adjust the disc speed and change the final material size by +/-30%.
Conclusion: why ELT’s management is important for sustainability
Recycling end-of-life tyres is a crucial global effort to reduce waste, preserve resources, and minimize environmental impact. With the market’s growth and ongoing technological innovation, the potential for new sustainable products derived from tyre recycling will continue to expand, contributing to sustainability across various industries.